Factory Operating Maintenance Instructions For Bomag Cold Milling Machine. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.
Format: PDF
Language: ENG
Pages: 174
Number: 00806061 (august 2011)
Searchable: Yes
Model
Bomag Cold Milling Machine
BM2000-60
S/N 821 836 26 ….>
S/N 821 836 31 ….>
Contents
TECHNICAL DATA
SAFETY REGULATIONS
-INDICATORS AND CONTROLS
View Of Operating Console Left, Middle, Right
General Notes
Display And Control Elements Operator’s Stand
View Rear Right Hand Control Panel
Control Elements On Rear Right Hand Control Panel
View Rear Left Hand Control Panel
Description Of Rear Left Hand Control Panel
View Front Right Hand Control Panel
Description Of Front Right Hand Control Panel
View Front Left Hand Control Panel
Description Of Front Left Hand Control Panel
Automatic Levelling Control
Description Of Levelling Control
View Of Ultrasonic Levelling System
View Of Water Spray System
-OPERATION
General Notes
Tests Before Taking Into Operation
Starting The Engine
Starting With Jump Wires
Shutting Down The Engine
Steering
Lifting / Lowering The Machine
Switching The Milling Drum On/Off
Operating The Scraper
Operation Of Loading And Gathering Conveyor Belt
Driving The Machine
Preparing For Work
Work Operation, Setting The Cutting Depth
Automatic Milling Depth Control
Milling Depth Control By Means Of Ultrasound
Stopping/Finishing Work
Adjusting The Seat
Operating The Engine Hood
Operating The Protection Roof On The Operator’s Stand
In Events Of Emergency
Preparing The Machine For A Longer Rest
Operating The Water Spray System
Folding / Unfolding The Loading Conveyor Belt
Loading, Transport
Multi-Function Display
Scrapping The Machine
-MAINTENANCE
General Notes On Maintenance
Fuels And Lubricants
Table Of Fuels And Lubricants
Running-In Instructions
Maintenance Table
Check The Engine Oil Level
Check, Clean The Water Separator
Check The Fuel Level
Checking The Hydraulic Oil Level
Check Water Level, Spray Nozzles
Check/Replace Cutting Tools, Scraper
Checking The Track Plates
Check, Tighten The Conveyor Belts
Checking The Safety Ropes
Lubricate The Machine
Check The Coolant Level
Check The Oil Level In The Pump Drive Gear
Retightening The Track Shoe Fastening Screws
Lubricate The Machine
Clean The Cooling Fins On Engine And Hydraulic Oil Cooler
Cleaning The Engine
Changing Engine Oil And Oil Filter Cartridges
Checking, Replacing The Generator V-Belt
Checking, Replacing The Milling Drum V-Belt
Checking The Track Drive
Lubricate The Machine
Check, Adjust The Valve Clearance
Change The Fuel Pre-Filter Cartridge
Change The Fuel Filter Cartridge
Check Fastening Of Engine / Turbocharger / Combustion Air Hoses
Checking The Crankcase Pressure
Intercooler, Draining Oil And Condensation Water
Change The Hydraulic Oil
Changing The Hydraulic Oil Filter
Change The Oil In The Pump Drive Gear
Change The Oil In The Milling Drum Reduction Gear
Oil Change In Milling Drum Bearing
Oil Change In Track Drive Gear
Drain The Sludge From The Fuel Tank
Battery Maintenance
Changing The Coolant
Changing The Injection Valve
Changing The Coolant Pump
Changing The Pressure Retaining Valve On Te Injection Pump
Changing The Crankcase Ventilation Valve
Service The Combustion Air Filter
Clean Water Tank And Water Filter
Water Spray System, Maintenance In Case Of Frost
Clean The Pressure Cleaner Water Filter
Tightening Torques
Engine Conservation
-TROUBLESHOOTING
General Notes
Engine
What you get
You will receive PDF file with high-quality manual on your email immediately after the payment.
Reviews
There are no reviews yet