Bomag BW213D-4 Operating Maintenance Instructions Single Drum Roller 00804361 manuals in PDF

Factory Operating Maintenance Instructions For Bomag Single Drum Roller. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Format: PDF
Language: ENG
Pages: 148
Number: 00804361 (may 2012)
Searchable: Yes

Model

Bomag Sigle Drum Roller
BW213D-4
S/N 101 583 08 1960>

Contents

TECHNICAL DATA
SAFETY REGULATIONS
-INDICATORS AND CONTROLS
General Notes
Description Of Indicators And Control Elements
Display And Control Elements BTM
Description Of Indicating And Control Elements BTM
Line Diagram (EVIB)
Description Of Line Diagram (EVIB)
Bar Diagram (EVIB)
-OPERATION
General
Tests Before Taking Into Operation
Electronic Immobilizer
Starting The Engine
Starting With Jump Wires
Driving The Machine
Stopping The Machine, Operating The Parking Brake
Shutting Down The Engine
Switching The Vibration On And Off
What To Do In Events Of Emergency
Adjusting The Steering Wheel
Adjusting The Seat
Operating The Heating/Air Conditioning System
Operating The Hood
BVC/BTM05 Settings Before Start-Up
Measuring Pass With BTM
Finishing Compaction Of A Track
Printing Measuring Data After Completing Compaction
Changing The Paper Roll In The Measuring Value Printer
Changing The Printer Ribbon In The Measuring Value Printer
Towing In Case Of An Engine Failure
Loading/Transport
-MAINTENANCE
General Notes On Maintenance
Fuels And Lubricants
Table Of Fuels And Lubricants
Running-In Instructions
Maintenance Table
Checking The Engine Oil Level
Checking The Fuel Level
Check The Coolant Level
Check The Hydraulic Oil Level
Check The Tire Pressure
Clean The Cooling Fins On Engine And Hydraulic Oil Cooler
Check The Oil Level In The Drive Axle
Check The Oil Level In The Wheel Hubs
Check The Oil Level In The Vibration Bearings
Check The Parking Brake
Checking, Replacing The Refrigerant Compressor V-Belt
Changing Engine Oil And Oil Filter
Check, Clean The Water Separator
Draining The Sludge From The Fuel Tank
Battery Service
Service The Air Conditioning
Cleaning The Circulation Air Filter For The Heating
Changing The Bypass Filter
Checking / Replacing The Ribbed V-Belt
Replace The Fuel Filter Cartridge
Change The Fuel Pre-Filter Cartridge
Check The Engine Mounts
Change The Oil In The Vibration Bearings
Change The Oil In The Drive Axle
Changing The Oil In The Wheel Hubes
Retighten The Fastening Of The Axle On The Frame
Tightening The Wheel Nuts
Check The Rops
Check The Travel Control
Adjust The Valve Clearance
Changing Hydraulic Oil And Breather Filter
Changing The Hydraulic Oil Filter
Changing The Coolant
Replacing Ribbed V-Belt And Idler Pulley
Replace The Injection Valves
Replacing The Crank Case Ventilation Valve
Air Filter Maintenance
Adjust The Scrapers
Clean The Machine
Changing The Tires
Change The Fresh Air Filter In The Cabin
Fill The Provision Tank For The Windscreen Washer System
Tightening Torques
Engine Conservation
-TROUBLESHOOTING
General Notes
Reading Out Faults BVC/BTM05
Engine Problems
-CAB ASSEMBLY BEFORE INITIAL START-UP
Preparations
Cabin Assembly
Final Function Tests And Checks
-DISPOSAL
Final Shut-Down Of Machine

What you get

You will receive PDF file with high-quality manual on your email immediately after the payment.