New Holland T4.80LP T4.90LP T4.100LP T4.110LP With PIN Operators Manual Tractor manuals in PDF

Factory Operators Manual For New Holland Tractor. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Format: PDF
Language: English
Quantity of Manuals: 3
Pages: 446; 452; 426
Number: 51587130 (march 2019); 51602053 (march 2019); 51602072 (march 2019)
Bookmarks: Yes
Searchable: Yes

Model

New Holland Tractor
T4.80LP
T4.90LP
T4.100LP
T4.110LP
PIN HLRT4**L*HLT00001 and above

Contents

-GENERAL INFORMATION
Note To The Owner
Intended Use
Electro-Magnetic Compatibility (EMC)
Manual Scope And Required Training Level
Metric And Imperial Units Abbreviations
Identification Plates
Approval Data Plate
Operator’s Manual Storage
Machine Orientation
Exhaust Gas Recirculation (EGR) System
-SAFETY INFORMATION
Safety Rules And Signal Word Definitions
Safety Rules – General Information
Safety Rules – Maintenance
Safety Rules – Wheels And Tires
Safety Rules – Explosions And Fires
Safety Rules – Fire Extinguisher
Safety Rules – Battery
Safety Rules – Operator Presence System
Safety Rules – Power Take-Off (PTO)
Safety Rules – Seat Belts
Safety Rules – Operator Protective Structure
Safety Rules – Category 2 Cabin (Standard)
Safety Rules – Category 4 Cabin (If Equipped)
Safety Rules – HVAC System
Safety Rules – Personal Protective Equipment (PPE)
Safety Rules – “Do Not Use” Sign
Safety Rules — Application Of Plant Protection Products
Safety Rules – Hazardous Chemicals
Safety Rules – Near Utilities
Safety Rules – In The Event Of Electrical Storms
Safety Rules – Mounting And Dismounting The Machine
Safety Rules – Lifting And Overhead Loads
Ecology And The Environment
Safety Aspects In Accordance With Regulation (EU) 1322/2014 – Annex XXII And Subsequent Amendments And Modifications
Noise Level
Vibration Levels
Machine Stability
Decals And Plates – Safety Signs
Towing The Tractor For Recovery
Tractor Jacking Points
Burn Prevention
Emergency Exit
Wheel Chocks
-CONTROLS AND INSTRUMENTS
Access To Operator’s Platform
Operator’s Seat
Forward Controls
Left-Hand Side Controls
Right-Hand Side Controls
Overhead Controls
Exterior Controls
Display
-OPERATING INSTRUCTIONS
Commissioning The Unit
Starting The Unit
Stopping The Unit
Moving The Unit
-TRANSPORT OPERATIONS
Road Transport
Recovery Transport
-WORKING OPERATIONS
General Information
Engine Accelerator Controls
Constant Engine Rpm
Clutch Pedal
Brakes
Trailer Braking Systems
Four-Wheel Drive (4Wd)
Differential Lock System
Air Conditioning
Cab Pressurizing System
Remote Control Valves
Rear Power Take-Off (PTO)
Front Power Take-Off (PTO)
Rear Hydraulic Lift
Rear Three-Point Hitch
Three-Point Hitch Front
Towbar
Rear Tow Hitch
Wheels And Tires
Track Adjustment
Ballasting
Power Sockets
Beacon
-MAINTENANCE
General Information
Maintenance Planning
As Required
At Warning Message Display
Every 10 Hours Or Daily
Initial 50 Hours
Every 50 Hours
Every 100 Hours
Every 200 Hours
Every 300 Hours
Every 600 Hours
Every 1200 Hours Or Annually
Every 1200 Hours Or Two Years
Every Two Years
Every 3600 Hours
Electrical System
Light Adjustments
Fuse And Relay Locations
Storage
Calibrations
-TROUBLESHOOTING
Fault Code Resolution
Symptom(S)
-SPECIFICATIONS
Dimensions And Weights
Maximum Permitted Loads On Front And Rear Axle
Maximum Permitted Loads On Towing Hitch
Maximum Permitted Loads On Drawbar
Maximum Permitted Loads On Three Point Hitch
Additional Equipment Attachment Points
Mid-Mounted Implement Mounting Brackets
Speed Table For 16 X 16 Gearbox
Speed Table For 28 X 16 Gearbox
Speed Table For 32 X 16 Gearbox
Speed Table 44 X 16 Gearbox
Capacities
Consumables
General Specification
-ACCESSORIES
Tool Box – Overview
Radio
Fuel Cooler – Overview

What you get

You will receive PDF file with high-quality manual on your email immediately after the payment.