Factory Operators Manual For New Holland Tractor. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.
Format: PDF
Language: English
Pages: 253
Number: 87639930 2/07
Bookmarks: Yes
Searchable: Yes
Model
New Holland Tractor TV145
Contents
Air-Conditioning Condenser Cores, Check
Air Filter Restriction Light ON
Articulation Lock
Articulation Stop Adjustment
As Required Maintenance
Audible/Visual Alarms
Auxiliary Hydraulic Drive Suction Filter, Change
Auxiliary Hydraulic High Pressure Return Filter Change
Ballast Limitations
Ballasting Weight Calculation Chart
Battery Connections, Clean
Battery Cover and Location
Battery Electrolyte Level, Check
Blue Valve (Detent)
Brake Fluid, Change
Brake Fluid Reservoir Level, Check
Brakes Troubleshooting
Braking System
Bulb Replacement
Cab
Cab Air Filters, Change
Cab Air Filters, Clean
Cab Controls, Additional
Cab-End Axle Oil Level
Cab-End Control Lever Functions
Cab-End Implement to Cab ClearanceJ
Cab-End Lighting
Cab-End (Rear) Drawbar
Cab-End Three-Point Hitch, Lubricate
Cab Floor, Cleaning
Cab Mounted Accessories
Cab Mounted Accessories Installation
Cab Seat and Upholstery, Cleaning
Cab Troubleshooting
Calibrating the Electronic Instrument Control System
California Emission Control Statement
California Proposition 65 Warning
Changing the PTO Stub Shaft
Changing Tractor Direction
Chemical Safety
Cold Start Aid Ether Injection
Cold Weather Starting
Connecting the Drawbar
Contents
Control Pad
Control Pad Functions
Controls and Instruments Overview
Crankcase Breather Element, Change
Critical Alarms
Daily Cleaning, Additional
Deliver Report
Diesel Fuel Selection Chart
Differential Lock
Dimensions
Drawbar Preparation
Dynamic Braking
Ecology and the Environment
Electrical System Troubleshooting
Electronic Display Monitor
Electronic Instrument Control System (EIC)
Electronic Instrument Control System (EIC)
Additional Features
Electronic Instrument Control System (EIC) Calibrating
Electronic Instrument Control System (EIC) Normal Operation
Electronic Instrument Control System (EIC) Troubleshooting
Engine Accessory Drive Belt, Inspect
Engine Air Cleaner Elements, Change
Engine Air Intake Connections, Check
Engine Block Heater
Engine Coolant and Filter/Conditioner, Change Engine Coolant Level, Check
Engine-End Axle Oil, Change
Engine-End Axle Oil Level, Check
Engine-End Axle Oscillation Pivots, Lubricate
Engine-End (Front) Drawbar
Engine-End Implement to Hood Clearance
Engine-End Three-Point Hitch, Lubricate
Engine-End Lighting
Engine-End Valves
Engine Hood
Engine Identification
Engine Idle Speed
Engine Oil and Filter, Change
Engine Oil Level, Check
Engine Oil Selection
Engine Outer Air Filter Element, Clean
Engine Running – Normal Operation
Engine to Splitter Box Drive Shaft Steady Bearing, Lubricate
Engine Troubleshooting
Entering the Cab
Environment
Ether Canister, Install
Every 10 Hours of Operation or Daily
Every 50 Hours of Operation
Every 300 Hours of Operation
Every 600 Hours of Operation
Every 1200 Hours or Annually
Every 1200 Hours or Two Years
Every 1800 Hours
Exterior Light Configuration
External Lighting
External Mirrors
Federal Emissions Warranty
First 50-Hour Service
Flexible Link Ends
Floor and Foot Controls
Flow Control Adjustment
FNR Lever Operation
Foot Brake
Front Axle Drive Shaft Steady Bearing, Lubricate
Front Axle Drive Shaft Slip Yoke, Lubricate
Front Console Controls
Front Steenng Cylinder Pins, Lubricate
Fuel Filter Element, Change
Fuel Filter Primary (Rear) Element, Change Fuel Injection System, Bleeding
Fuel Injectors, Clean and Reset
Fuel Requirements
Fuel System Water Separator, Drain
Fuel Tank Hoses and Connections, Inspect
Fuel Tanks, Drain
Fuel Tanks, Filling
Fuse and Relay Panel
Fuses and Relays, Change
General Information
Green Valve
Hauling the Tractor on a Transporter
Headlamp Adjustment
Heating System Hoses, Check
Hitch Position Set-Up
Hood
Hydraulic Coupler Connection
Hydraulic Coupler Kit (3/4’9
Hydraulic Motor Operation Setup
Hydraulic Oil, Change
Hydraulic Oil Filter, Change
Hydraulic Oil Heater
Hydraulic Quick Couplers
Hydraulic System, Inpecting
Hydraulic System Troubleshooting
Hydrostatic System Operation
Hydrostatic System Troubleshooting
Identification Numbers
Indicator Light Display
Implement Warning Lamps & SMV Symbol
Improvements
In-Line Fuel Filter, Change
International Symbols
Introduction to this Manual
Jacking the Tractor
Key Switch
Left Side Post Controls
Light Chart
Liquid Ballast
Liquid Ballast Calculations
Loader Accessories
Loader Safety Information
Lockout Levers
Lower Articulation Pin, Lubricate
Lubricants and Capacities
Lubrication and Maintenance
Lubrication and Maintenance Chart
Master Circuit Breaker, Resetting
Master PTO Shields
Minimum Hardware Tightening Torques
Mirror
Multi-Function Switch
Non-Critical Alarms
Oil Change Interval
Oil Cooler Condenser Cores, Check
Operating Continuous Flow Hydraulic Equipment
Operation
Operation Troubleshooting
Operator Seat Controls
Operator’s Manual Holder
Operator’s Seat
Optional Accessories
Overhead Climate Controls
Overhead Controls
Override Switch
Park Brake
Park Brake Linkage Adjustment, Check
Plastic and Resin Parts
Power Take Off (PTO)
Precautionary Statements
Pre-Operation Checks
Pressure Release Detent Adjustment
Protective Shielding
PTO
PTO Connection
PTO Operation
Radiator Condenser Cores, Check
Radiator System Hoses, Check
Radio
Rear Steering Cylinder Pins, Lubricate
Rear Window
Remote Control Operation
Removing Equipment
Removing Guards to Gain Access to Components for Inspection / Maintenance
Right Side Post Controls
Roof Warning Light Bulbs, Change
Safety
Safety Cab
Safety Chain
Safety Decals
Seat Adjustments
Seat Belt
Seat Console Controls
Seat/Console Rotation
Semi-Mounted Implements
Seven Pin Auxiliary Connector
(Six) 6-Position Rim
(Six) 6-Position Wheel Spacing Adjustment
Slow Moving Vehicle
Specifications
Speed Range Operation
Splitter Box Drive Shaft Slip Yoke, Lubricate
Starter Battery Cable Connections, Clean
Starter Solenoid Shield
Steering Wheel and Column
Stop/Tail/Tum Bulb Replacement
Storing the Tractor
Tan Valve (Detent Float)
Three-Point Hitch
Three-Point Hitch Controls
Three-Point Hitch Linkage Adjustments
Three-Point Hitch Operation
Three-Point Hitch System Error Codes
Three-Point Hitch Troubleshooting
Throttle and Hydrostatic System Operation
Tire and Rim Repair
Tire and Rim Service
Tire and Wheel Options
Tire and Wheel Spacing
Tire Condition and Air Pressure, Check
Tire Pressure and Load Capacity Chart
To The Owner
Towing a Disabled Tractor
Tractor Accessories
Tractor Ballast
Tractor Booster Starting
Tractor Identification Data
Tractor Lighting
Tractor Orientation
Tractor Start-up and Engine Operation
Tractor Warning Lamps and SMV Symbol
Troubleshooting
Upper Articulation Pin, Lubricate
Vehicle Identification Plate
Weights
Welding and Battery Charging
Wheel Hardware Torque, Check
Wheel Spacers
Wheel Track Width
Wheel Tread Spacing and Articulation Stops
Wheel Weights
Windshield Washer Fluid Reservoir, Check
Windshield Wiper and Washer Switches
Windshield Wiper Blade, Change
Work Lights Bulb Replacement
What you get
You will receive PDF file with high-quality manual on your email immediately after the payment.
Reviews
There are no reviews yet